DEBEER 1K PLASTIC PRIMER SURFACER

DESCRIPTION
The DeBeer Refinish 1K Plastic Primer Surfacer is applied wet-on-wet and may also be de-nibbed if necessary.

Area of application For plastic parts used in the motor vehicle industry.
Chemical base Special resins.
General qualities An adhesive primer on most plastics.
Economy Approx. 8m2/L/5um.
Gloss Matt.

Substrates See system overview. Suitable for plastic substrates such as:
PP – Polypropylene (always test first).
ABS – Acrylonitrile Butadiene Styrene.
PUR – Polyurethane.
PC – Polycarbonate.
PA – Polyamide (nylon).
EPDM – Ethylene Propylene Diene Mixed.
Do not use on polyethylene or polystyrene.

Finishing material All DeBeer finishes. If necessary in combination with 10-30% 2K Elastic 47-39.
Colour Colourless.

FEATURES:

• Suitable for all automotive plastics.
• Wet-on-wet application, can be de-nibbed if necessary.
• Good adhesion and optimum gloss holdout.
• For optimum performance a two-component (2K) wet-on-wet (non-sanding) primer is recommended before topcoat is applied.
• Ready for use – do not thin.
• In case of flexible plastics, add 10-30% Flexing Agent in the 2K Primer and 2K Topcoat before adding the hardener and thinner in the normal mixing ratio.