MEGURO SEAM SEAL TAPE

DESCRIPTION
Japanese company Meguro manufactures this patented seam tape used by many vehicle manufacturers on numerous vehicles. Accurately replicating the OEM seam seal on many vehicles (not flat like other brands) and flexible enough to go around corners without cutting, Meguro seam seal tape gives an OEM result in no time. Just spray on the primer, apply the tape and it’s ready to paint immediately!

HOW TO USE

• Scuff the surface of the panel with surface conditioning pads to remove any excess seal material from the seamed part of the surface.
• Use a blowgun to remove the dust and wipe off the surface with cleaning material or solvent. Surface should be clean and dry before spraying the primer.
• Apply the sealing tape primer evenly according to the directions until the surface appears glossy. It is essential to use the Meguro sealing tape primer to ensure secure bonding of the tape to the panel as well as to prevent rust.
• Air dry for approximately 5 minutes at 20ºC. Wait until the primer has dried and the surface is no longer sticky.
• Start at a corner and apply the tape in one direction. Peel off the film and, using your finger apply pressure at the beginning of the tape.
  Remove the film gradually as when the adhesive is dirty, it will lose contact with the panel. Never pull or stretch the tape. Start at a corner and apply the tape in one direction. Peel off the film and, using your finger apply pressure at the beginning of the tape.
  Remove the film gradually as when the adhesive is dirty, it will lose contact with the panel. Never pull or stretch the tape.