FINIXIA POLYESTER PUTTY BLACK -2KG

DESCRIPTION
Can be used on light metals and galvanized surfaces.
User info: mix your putty always with 2 to 3 % hardener; if you have any doubt, please use a balance. Too much hardener causes not only a fast drying, but can also cause detachment of the putty and can leave marks through the paint. Mix the hardener very carefully with the putty and avoid air infiltration during mixing, this can give irregularities during application and sanding of the putty. Choose the right putty for the right application.

FEATURES

• Black universal polyester putty
• Similar to “MULTI” putty but black colour
• Universal adhesion on old painted surfaces, steel, light metals, galvanized steel, aluminium, wood and MDF
• Perfect to finish plastic repairs
• Visual aid during application (black shining filler); makes it easy to see all irregularities & imperfections
• Built-in sanding guide: during sanding the putty fades from black to dark grey
• The spots that are too low (not sanded) clearly remain black
• Once degreased, the filler regains its deep black colour; inspecting for possible irregularities is easy now.
• Built-in coating guide: whether one finishes with beige or grey filler, once the black colour is covered, one can also be sure of the necessary thickness of the filler coating.
• Built-in sanding through guide: if afterwards one would sand through the putty accidentally, the black base will occur as a sanding-through guide.

Colour: black
Hardener: BPO red
Mixing ratio in %: 1-3